close
Choose Your Site
Global
Social Media
PVC imitation marble wall panels specifications:
width: 1220 mm
length: 2440 mm (adjustable by cutting)
thickness: 1 - 4 mm
weight: about 21 - 23 kg (4mm thickness)
PVC marble sheet features:
Rich in color, it can be better combined with the overall decoration. PVC marble sheets has the effect of natural marble, clear lines, and the simulation effect is as high as 99.5% or more. The color is uniform, the surface is smooth, wear-resistant, fire-proof, radiation-free, bendable, and light. The weight is one-fifth of natural marble, and the price is much lower than natural marble. A wide variety of PVC imitation marble patterns.
PVC marble sheet Application:
widely used in villa, airports, bus stations, light rail stations, stadiums, museums, libraries, science and technology museums, shopping malls, office buildings, administrative buildings, supermarkets, bathhouses, hotels, schools, clubs, elevated noise barriers, etc.
PVC imitation marble sheet extrusion process:
1. Add different raw materials into the high-speed heating and cooling mixer according to the formula, mix them, plasticize and extrude them through the conicial twin screw extruder, and then form them as a whole through the three rollers of calender machine unit, and laminate the surface with a polymer film with marble patterns or hot stamp the marble patterns on the surface through thermal transfer technology, and then use the cross cutting machine to accurately cut the finished substrate.
2. Put the finished substrate from PVC marble sheet extrusion production line into the UV coating machine for UV paint, and then dry and cure it through ultraviolet light to treat the surface. The manufactured board has bright color, strong visual impact, wear resistance, strong chemical resistance, long service life, no discoloration, and easy to clean.
Features of PVC marble wall panel making machine
- Automatic screw type feeding system, raw materials do not bridge, feeding stability
- Adopts horizontal gearbox and distribution box, build in cooling oil, easy to install and maintain.
- Be equipped with ABB inverter, Siemens Motor and Schneider electrics, lower staring power, reduce voltage fluctuation and easy to adjust speed
- Adopt conical twin screw extruder (which use 38CrMoAL material -- high-wearing, high strength, high temperature resistance, corrosion resistance), Due to its good feeding performance, mixing and plasticizing performance, exhaust performance, extrusion stability and other characteristics, it has been widely used in the molding and processing of extruded products.
- Flange surface be nickel-coating treatment, ensure the stable extrusion
PVC mable sheet making machine list:
1. Automaitc screw charger
2. Double screw materials feeder
3. SJ80/156 / SJ92/188 conical twin screw extruder machine
4. 1 - 4 mm extrusion T die 1350 mm
5. Mold temperature controller
6. Three rollers of calender machine
7. V design self cooling bracket
8. Rolling hauling off machine
9. Cross cutting machine
10. Auto stacker machine
PVC marble sheet extruder machine:
Adopts the conical twin screw extruder, the made PVC sheets with high density, and durable. Conical twin-screw extruder has large output and high efficiency, and is equipped with Omron temperature controller, frequency conversion speed regulation and other technologies to achieve a high level
Extruder use multiple ABB inverters, Uniform feeding, stable current and uniform discharge.
Extrusion with Siemens PLC control system, It is easy to maintain, adopts modular design, convenient fault diagnosis and replacement, and low maintenance cost. The PLC system is flexible and uses programmable language. It can be modified and adjusted according to user needs to adapt to different control occasions.
1350 Extrusion T die
Adopts hanger-type structural sheet die head. The hanger die head adopts a special double throttling design to make the thickness adjustment of the plate more accurate. The zone-controlled roller temperature control system can control the temperature of the pressure roller to make the plate uniform in thickness.
A continuous and unobstructed flow surface can be obtained at the die lip, and the 90-degree adjustable flow rod adjustment device can meet the needs of products of different thicknesses. The upper and lower die lips can adjust the thickness and the die lips can be replaced.
The surface is all hard chrome plated, the fasteners are 12.9 grade high-strength bolts, and high-quality, durable stainless steel heating rods are used for zone control and zone control heating.
The die is stable production, simple structure, easy to disassemble and clean.
Three rollers of Calender machine in pvc marble sheet production:
Adopts PLC control system, It can be modified and adjusted according to pvc sheet requirments to adapt to different control occasions.
three pics of 1500*400 mm mirror rollers, precise control of pvc marble sheet quality.
Lamination / Hot stamping working plate:
2 in 1 lamination and hot stamping device, easily to change the surface treatment request.
Self cooling bracket - hauling off machine - crossing cutting machine:
Self cooling bracket, papid cooling of the pvc sheet.
Two rollers of hualing off, speed up the extrusion capacity.
Servo cutting machine enables accurate control of PVC marble sheet length, crossing cutting design make the cutting side free of burrs.
Auto stacker machine
auto stacker working process: Lifting platform supplies board → sucks board → moves horizontally to the right place to connect to the track → vacuum is closed → board is discharged → repeats the process
Introducing our PVC Imitation Marble Wall Panel Making Machine, a cutting-edge piece of equipment designed to meet the growing demand for high-quality PVC imitation marble wall panels. With this machine, you can effortlessly produce a wide range of products, including UV high gloss decorative panels, stone-plastic decorative panels, PVC stone-plastic flooring, PVC imitation marble decorative panels, and carved decorative panels.
Our machine is equipped with advanced technology and features that ensure efficient and precise production. It allows you to create different styles and levels of stone-plastic imitation marble decorative panels, catering to the diverse needs and preferences of your customers.
When it comes to the tone of voice, we maintain a professional approach throughout the product description, highlighting the features and benefits of our PVC Imitation Marble Wall Panel Making Machine. We aim to provide clear and concise information to our customers, enabling them to make informed decisions and choose the best equipment for their business needs.
Parameters of PVC Marble Wall Panel Making Machine
Model | SJ80 | SJ92 |
Diameter of screw (mm) | 80/156 | 92/188 |
Working speed (kg/h) | 350 - 450 | 500 - 600 |
| Panel width | 1220 mm | 2000 mm |
| Main motor power | 55 KW | 110 KW |
| Capacity | 450 KG/H | 600 KG/H |
Materials for the production of UV PVC Imitation Marble Wall Panel
| Item | Materials Name |
| 1 | PVC resin |
| 2 | Cacium carbonate |
| 3 | Lead Stabilizer |
| 4 | CPE |
| 6 | Stearic acid |
| 9 | Paraffin |
| 10 | PE Wax |
PVC imitation marble wall panels specifications:
width: 1220 mm
length: 2440 mm (adjustable by cutting)
thickness: 1 - 4 mm
weight: about 21 - 23 kg (4mm thickness)
PVC marble sheet features:
Rich in color, it can be better combined with the overall decoration. PVC marble sheets has the effect of natural marble, clear lines, and the simulation effect is as high as 99.5% or more. The color is uniform, the surface is smooth, wear-resistant, fire-proof, radiation-free, bendable, and light. The weight is one-fifth of natural marble, and the price is much lower than natural marble. A wide variety of PVC imitation marble patterns.
PVC marble sheet Application:
widely used in villa, airports, bus stations, light rail stations, stadiums, museums, libraries, science and technology museums, shopping malls, office buildings, administrative buildings, supermarkets, bathhouses, hotels, schools, clubs, elevated noise barriers, etc.
PVC imitation marble sheet extrusion process:
1. Add different raw materials into the high-speed heating and cooling mixer according to the formula, mix them, plasticize and extrude them through the conicial twin screw extruder, and then form them as a whole through the three rollers of calender machine unit, and laminate the surface with a polymer film with marble patterns or hot stamp the marble patterns on the surface through thermal transfer technology, and then use the cross cutting machine to accurately cut the finished substrate.
2. Put the finished substrate from PVC marble sheet extrusion production line into the UV coating machine for UV paint, and then dry and cure it through ultraviolet light to treat the surface. The manufactured board has bright color, strong visual impact, wear resistance, strong chemical resistance, long service life, no discoloration, and easy to clean.
Features of PVC marble wall panel making machine
- Automatic screw type feeding system, raw materials do not bridge, feeding stability
- Adopts horizontal gearbox and distribution box, build in cooling oil, easy to install and maintain.
- Be equipped with ABB inverter, Siemens Motor and Schneider electrics, lower staring power, reduce voltage fluctuation and easy to adjust speed
- Adopt conical twin screw extruder (which use 38CrMoAL material -- high-wearing, high strength, high temperature resistance, corrosion resistance), Due to its good feeding performance, mixing and plasticizing performance, exhaust performance, extrusion stability and other characteristics, it has been widely used in the molding and processing of extruded products.
- Flange surface be nickel-coating treatment, ensure the stable extrusion
PVC mable sheet making machine list:
1. Automaitc screw charger
2. Double screw materials feeder
3. SJ80/156 / SJ92/188 conical twin screw extruder machine
4. 1 - 4 mm extrusion T die 1350 mm
5. Mold temperature controller
6. Three rollers of calender machine
7. V design self cooling bracket
8. Rolling hauling off machine
9. Cross cutting machine
10. Auto stacker machine
PVC marble sheet extruder machine:
Adopts the conical twin screw extruder, the made PVC sheets with high density, and durable. Conical twin-screw extruder has large output and high efficiency, and is equipped with Omron temperature controller, frequency conversion speed regulation and other technologies to achieve a high level
Extruder use multiple ABB inverters, Uniform feeding, stable current and uniform discharge.
Extrusion with Siemens PLC control system, It is easy to maintain, adopts modular design, convenient fault diagnosis and replacement, and low maintenance cost. The PLC system is flexible and uses programmable language. It can be modified and adjusted according to user needs to adapt to different control occasions.
1350 Extrusion T die
Adopts hanger-type structural sheet die head. The hanger die head adopts a special double throttling design to make the thickness adjustment of the plate more accurate. The zone-controlled roller temperature control system can control the temperature of the pressure roller to make the plate uniform in thickness.
A continuous and unobstructed flow surface can be obtained at the die lip, and the 90-degree adjustable flow rod adjustment device can meet the needs of products of different thicknesses. The upper and lower die lips can adjust the thickness and the die lips can be replaced.
The surface is all hard chrome plated, the fasteners are 12.9 grade high-strength bolts, and high-quality, durable stainless steel heating rods are used for zone control and zone control heating.
The die is stable production, simple structure, easy to disassemble and clean.
Three rollers of Calender machine in pvc marble sheet production:
Adopts PLC control system, It can be modified and adjusted according to pvc sheet requirments to adapt to different control occasions.
three pics of 1500*400 mm mirror rollers, precise control of pvc marble sheet quality.
Lamination / Hot stamping working plate:
2 in 1 lamination and hot stamping device, easily to change the surface treatment request.
Self cooling bracket - hauling off machine - crossing cutting machine:
Self cooling bracket, papid cooling of the pvc sheet.
Two rollers of hualing off, speed up the extrusion capacity.
Servo cutting machine enables accurate control of PVC marble sheet length, crossing cutting design make the cutting side free of burrs.
Auto stacker machine
auto stacker working process: Lifting platform supplies board → sucks board → moves horizontally to the right place to connect to the track → vacuum is closed → board is discharged → repeats the process
Introducing our PVC Imitation Marble Wall Panel Making Machine, a cutting-edge piece of equipment designed to meet the growing demand for high-quality PVC imitation marble wall panels. With this machine, you can effortlessly produce a wide range of products, including UV high gloss decorative panels, stone-plastic decorative panels, PVC stone-plastic flooring, PVC imitation marble decorative panels, and carved decorative panels.
Our machine is equipped with advanced technology and features that ensure efficient and precise production. It allows you to create different styles and levels of stone-plastic imitation marble decorative panels, catering to the diverse needs and preferences of your customers.
When it comes to the tone of voice, we maintain a professional approach throughout the product description, highlighting the features and benefits of our PVC Imitation Marble Wall Panel Making Machine. We aim to provide clear and concise information to our customers, enabling them to make informed decisions and choose the best equipment for their business needs.
Parameters of PVC Marble Wall Panel Making Machine
Model | SJ80 | SJ92 |
Diameter of screw (mm) | 80/156 | 92/188 |
Working speed (kg/h) | 350 - 450 | 500 - 600 |
| Panel width | 1220 mm | 2000 mm |
| Main motor power | 55 KW | 110 KW |
| Capacity | 450 KG/H | 600 KG/H |
Materials for the production of UV PVC Imitation Marble Wall Panel
| Item | Materials Name |
| 1 | PVC resin |
| 2 | Cacium carbonate |
| 3 | Lead Stabilizer |
| 4 | CPE |
| 6 | Stearic acid |
| 9 | Paraffin |
| 10 | PE Wax |
