close
Choose Your Site
Global
Social Media
SJ48/105,SJ53/128, SJ53/128, SJ65/138
Eans Machinery
847720900
PVC Ceiling Wall Panel Extrusion Production Line
PVC wall panel is made of polyvinyl chloride resin as the base material, adding anti-aging agent, modifier and other additives, and is made through mixing, calendering, vacuum forming and other processes. PVC wall panel production line consists of a conical twin-screw plastic extruder, die head and calibration mold, vacuum shaping table, tractor, cutting machine, PVC film laminating machine (or double colors printing machine), stacking machine, high-speed PVC mixer, plastic crusher, etc. PVC wall panel / PVC decorative panel is made of PVC resin as the main raw material. The surface pattern changes as well.
Features of PVC Wall Panel Production Line
- PVC wall panel extrusion machine has a vacuum cooling and shaping process. After the mold is installed, it is heated, the barrel temperature rises to about 200℃, the mold temperature is about 190℃, and each section quickly rises to the required temperature.
-The extruded material is required to be fully plasticized without decomposition, the material is discharged evenly from the upper and lower sides of the extrusion die head, and the ribs can be pulled only when the discharge speed is consistent with the surface. The normal production temperature is 210℃.
- When starting the traction, cover the vacuum shaping template, then start the vacuum pump, calibrate the vacuum template and the extrusion die concentrically, on the same straight line, and ensure that the vacuum degree is above 0.04M Pa.
PVC wall panel extruder:
- The PVC wall panel production line adopts a special enlarged eddy current cooling system to facilitate cooling and shaping.
- Adopt conical twin screw extruder(which use 38CrMoAL material -- high-wearing, high strength, high temperature resistance, corrosion resistance), It has good feeding performance, mixing and plasticizing performance, exhaust performance, extrusion stability and other characteristics. It has other advantages of ordinary twin-screw extruders and can achieve high output, high quality and high efficiency.
The screw and barrel in PVC wall panel production line:
PVC wall panel extrusion die and calibration mold:
- This production line is used to manufacture PVC wall panel with width normally from 200mm to 600mm with different section shape and height, by changing the mold.
Vacuum cooling table:
-Vacuuming to quickly set the shape, the surface of the PVC panel is smoother,
-Adopt multiple sets of copper valves, which are durable and can continuously supply cooling water.
Hual off machine for PVC wall panel production line:
- The tractor adopts special speed ratios, it is used to easily produce panels of various weights, such as, heavy weight panel, light weight panel, etc.
-The hauling off machine works smoothly and there are no indentations on the surface of the gusset plate. It has good reliability and large traction force.
Cutting machine:
- Adopts saw blade cutter in cutting machine, the cutting edges in PVC wall panel are more flat and beautiful.
With our PVC Wall Panel Production Line, you can confidently deliver products that meet the highest standards of quality and performance. Invest in our reliable and efficient machinery to enhance your production capabilities and satisfy the needs of your customers.
Parameters of PVC Wall Panel Production Line
Model | SJSZ48 | SJSZ53 | SJSZ55 | SJSZ65 |
| Diameter of screw | 48/105 | 53/128 | 55/120 | 65/132 |
| Screw and barrel | Conical twin screw | |||
Working speed (kg/h) | 120 | 150 | 180 | 250 |
| Panel width (Max.) | 200 mm | 300 mm | 300 mm | 600 mm |
Main motor power | 18 KW | 22 KW | 22 KW | 37 KW |
The surface of PVC ceiling / wall panel can be treated by hot stamping machine, double colors printing and UV varnish coating machine or lamination machine, which can make imitation marble design, fabric design, wooden design on surface of PVC ceiling or PVC wall panel.
Online 2 in 1 hot stamping and lamination machine:
The PVC wall panel after lamination:
This lamination machine is used to laminate the color film on PVC wall panel and PVC ceiling panel with different width, such as, 200 mm, 250 mm, 300 mm and so on.The equipment designed by our company can realize integrated offline and online functions to help customers maximize their benefits.
Our equipment has an automatic tension system that can automatically adjust the bonding strength between the film and the sheet.
PVC wall panel double colors printing machine:
PVC wall panel printing machine is used to print two colors on the surface of PVC sheets /boards, such as PVC wall panels, PVC ceiling panels, PVC doors, PVC edge bands etc. By switching different colors of printing ink and different printing rollers, the surface of PVC sheets can get different colors and patterns.
The production process of double colors printing and UV coating line:
PVC sheets/boards → dust free cleaner → double colors patterns printing → drying → roller coating with varnish → IR leveling → UV drying → testing → packaging
patterns embossing roller
UV varnish applying rollers:
PVC Ceiling Wall Panel Extrusion Production Line
PVC wall panel is made of polyvinyl chloride resin as the base material, adding anti-aging agent, modifier and other additives, and is made through mixing, calendering, vacuum forming and other processes. PVC wall panel production line consists of a conical twin-screw plastic extruder, die head and calibration mold, vacuum shaping table, tractor, cutting machine, PVC film laminating machine (or double colors printing machine), stacking machine, high-speed PVC mixer, plastic crusher, etc. PVC wall panel / PVC decorative panel is made of PVC resin as the main raw material. The surface pattern changes as well.
Features of PVC Wall Panel Production Line
- PVC wall panel extrusion machine has a vacuum cooling and shaping process. After the mold is installed, it is heated, the barrel temperature rises to about 200℃, the mold temperature is about 190℃, and each section quickly rises to the required temperature.
-The extruded material is required to be fully plasticized without decomposition, the material is discharged evenly from the upper and lower sides of the extrusion die head, and the ribs can be pulled only when the discharge speed is consistent with the surface. The normal production temperature is 210℃.
- When starting the traction, cover the vacuum shaping template, then start the vacuum pump, calibrate the vacuum template and the extrusion die concentrically, on the same straight line, and ensure that the vacuum degree is above 0.04M Pa.
PVC wall panel extruder:
- The PVC wall panel production line adopts a special enlarged eddy current cooling system to facilitate cooling and shaping.
- Adopt conical twin screw extruder(which use 38CrMoAL material -- high-wearing, high strength, high temperature resistance, corrosion resistance), It has good feeding performance, mixing and plasticizing performance, exhaust performance, extrusion stability and other characteristics. It has other advantages of ordinary twin-screw extruders and can achieve high output, high quality and high efficiency.
The screw and barrel in PVC wall panel production line:
PVC wall panel extrusion die and calibration mold:
- This production line is used to manufacture PVC wall panel with width normally from 200mm to 600mm with different section shape and height, by changing the mold.
Vacuum cooling table:
-Vacuuming to quickly set the shape, the surface of the PVC panel is smoother,
-Adopt multiple sets of copper valves, which are durable and can continuously supply cooling water.
Hual off machine for PVC wall panel production line:
- The tractor adopts special speed ratios, it is used to easily produce panels of various weights, such as, heavy weight panel, light weight panel, etc.
-The hauling off machine works smoothly and there are no indentations on the surface of the gusset plate. It has good reliability and large traction force.
Cutting machine:
- Adopts saw blade cutter in cutting machine, the cutting edges in PVC wall panel are more flat and beautiful.
With our PVC Wall Panel Production Line, you can confidently deliver products that meet the highest standards of quality and performance. Invest in our reliable and efficient machinery to enhance your production capabilities and satisfy the needs of your customers.
Parameters of PVC Wall Panel Production Line
Model | SJSZ48 | SJSZ53 | SJSZ55 | SJSZ65 |
| Diameter of screw | 48/105 | 53/128 | 55/120 | 65/132 |
| Screw and barrel | Conical twin screw | |||
Working speed (kg/h) | 120 | 150 | 180 | 250 |
| Panel width (Max.) | 200 mm | 300 mm | 300 mm | 600 mm |
Main motor power | 18 KW | 22 KW | 22 KW | 37 KW |
The surface of PVC ceiling / wall panel can be treated by hot stamping machine, double colors printing and UV varnish coating machine or lamination machine, which can make imitation marble design, fabric design, wooden design on surface of PVC ceiling or PVC wall panel.
Online 2 in 1 hot stamping and lamination machine:
The PVC wall panel after lamination:
This lamination machine is used to laminate the color film on PVC wall panel and PVC ceiling panel with different width, such as, 200 mm, 250 mm, 300 mm and so on.The equipment designed by our company can realize integrated offline and online functions to help customers maximize their benefits.
Our equipment has an automatic tension system that can automatically adjust the bonding strength between the film and the sheet.
PVC wall panel double colors printing machine:
PVC wall panel printing machine is used to print two colors on the surface of PVC sheets /boards, such as PVC wall panels, PVC ceiling panels, PVC doors, PVC edge bands etc. By switching different colors of printing ink and different printing rollers, the surface of PVC sheets can get different colors and patterns.
The production process of double colors printing and UV coating line:
PVC sheets/boards → dust free cleaner → double colors patterns printing → drying → roller coating with varnish → IR leveling → UV drying → testing → packaging
patterns embossing roller
UV varnish applying rollers:
