close
Choose Your Site
Global
Social Media
SJ65/132, SJ80/156
Eans Machinery
847720900
PVC Vinyl Siding Wall Panel Making Machine
ASA Membrane Technology:
PVC soffit wall panels width: 20.3 cm, 22.9 cm, 25.4 cm, etc.
Wall thickness: 0.9/1.0 /1.1 /1.2 / 1.3 mm
Features of Exterior PVC Siding Panel Making Machine
PVC Siding Panel Extruder Machine
- Automatic screw type feeding system, raw materials do not bridge, feeding stability
- Adopts horizontal gearbox and distribution box, build in cooling oil, easy to install and maintain.
- Be equipped with ABB inverter, Siemens Motor and Schneider electrics, lower staring power, reduce voltage fluctuation and easy to adjust speed
- Adopt conical twin screw extruder (which use 38CrMoAL material -- high-wearing, high strength, high temperature resistance, corrosion resistance), Due to its good feeding performance, mixing and plasticizing performance, exhaust performance, extrusion stability and other characteristics, it has been widely used in the molding and processing of extruded products.
- High torque, high speed, high extrusion output.
Vacuum calibration tank (water cooling type)
- The water collecting tank and storage tank are welded with a whole piece of stainless steel, which is not leaking for long-term use
- Be equipped with vacuum pump, recycling water, save water cost.
2 in 1 Hauling off and dust free cutting machine
- According to customers needed length, cutting the composite board
- Be equipped with PLC controller, it can set 7 sets of data, so the cutting length is adjustable freely
Parameters of PVC vinyl panel making machine
| Model | SJ65/132-SJ45/90 | SJ90/32-SJ55/110 |
| Max panel width (mm) | 400 mm | 400 mm |
| Working speed (m/min) | 8 - 10 m/min | 10 - 13 m/min |
PVC Vinyl Siding Wall Panel Making Machine
ASA Membrane Technology:
PVC soffit wall panels width: 20.3 cm, 22.9 cm, 25.4 cm, etc.
Wall thickness: 0.9/1.0 /1.1 /1.2 / 1.3 mm
Features of Exterior PVC Siding Panel Making Machine
PVC Siding Panel Extruder Machine
- Automatic screw type feeding system, raw materials do not bridge, feeding stability
- Adopts horizontal gearbox and distribution box, build in cooling oil, easy to install and maintain.
- Be equipped with ABB inverter, Siemens Motor and Schneider electrics, lower staring power, reduce voltage fluctuation and easy to adjust speed
- Adopt conical twin screw extruder (which use 38CrMoAL material -- high-wearing, high strength, high temperature resistance, corrosion resistance), Due to its good feeding performance, mixing and plasticizing performance, exhaust performance, extrusion stability and other characteristics, it has been widely used in the molding and processing of extruded products.
- High torque, high speed, high extrusion output.
Vacuum calibration tank (water cooling type)
- The water collecting tank and storage tank are welded with a whole piece of stainless steel, which is not leaking for long-term use
- Be equipped with vacuum pump, recycling water, save water cost.
2 in 1 Hauling off and dust free cutting machine
- According to customers needed length, cutting the composite board
- Be equipped with PLC controller, it can set 7 sets of data, so the cutting length is adjustable freely
Parameters of PVC vinyl panel making machine
| Model | SJ65/132-SJ45/90 | SJ90/32-SJ55/110 |
| Max panel width (mm) | 400 mm | 400 mm |
| Working speed (m/min) | 8 - 10 m/min | 10 - 13 m/min |
