close
Choose Your Site
Global
Social Media
SJ55/110, SJ55/120, SJ65/132, SJ80/156, SJ92/188
Eans Machine
847720900
Φ20-Φ630 series PVC pipe extrusion production line is mainly used in plastic PVC pipes with various diameters and wall thickness, This line is composed of conical twin screw extruder, Vacuum calibration tank, haul off, motors, cutter and stacker etc. The extruder and haul off methods are two-claw, three-claw four-claw, six-claw, eight-claw, ten-claw, twelve claw etc. You may choose saw blade cutting type or planetary cutting type. It is additionally attached with length counter and intensifying device. This line with reliable performance and high production efficiency. Our company can also manufacture special pipe production lines, such as, spiral silencing pipe and core foaming pipe according to your requirements.
The production line is developed with the advanced technology of west Europe by our company. The main machine is SJSZ55/110 or SJSZ65/132 conical twin screw extruder is equipped with double-tube single control stainless steel spraying calibration,it avoids waste condition when one tube is adjusted and the other one is affected. The auto single-control double drawing machine and cutting machine are combined with the front double calibration technology to make operation more flexible let you enjoy economic benefit which is brought by separate-control double tube extruding.
Four cavities PVC electrical tube, water supply pipe extrusion line can extruder four pipes at same time on one machine. This line save investment cost in factory building and production, which increase the capacity a lot and reduce production time. SJSZ65 conical twin-screw extruder can easily reach 5.5-6.5 ton/per day, the production speed take 16 mm as example can get more than 8-10 m/min. The whole line is composed of conical twin-screw extruder 65 mm, 4 cavity mould, 4 cavity cooling calibration tank, 4 station haul off, 4 station cutter and 4 station tipping table.
PVC pipe conical twin screw extruder machine:
Water supply/drain water/conduit pipe mold(single out/double out/four out mold):
PVC pipe vacuum calibration and cooling table:
PVC pipe hualing off and cutting machine:
| Pipe diameter | Extruder model | Max output | Max speed | Total power |
| 16 - 53 mm | 65/132 | 250 kg/h | 10 m/min | 85 kw |
| 50 - 110 mm | 55/110 | 180 kg/h | 10 m/min | 70 kw |
| 63 - 160 mm | 65/132 | 300 kg/h | 5 m/min | 90 kw |
| 110 - 250 mm | 80/156 | 400 kg/h | 3.5 m/min | 120 kw |
| 250 - 450 mm | 92/188 | 700 kg/h | 1.5 m/min | 200 kw |
| 315 - 630 mm | 92/188 | 700 kg/h | 0.9 m/min | 230 kw |
Φ20-Φ630 series PVC pipe extrusion production line is mainly used in plastic PVC pipes with various diameters and wall thickness, This line is composed of conical twin screw extruder, Vacuum calibration tank, haul off, motors, cutter and stacker etc. The extruder and haul off methods are two-claw, three-claw four-claw, six-claw, eight-claw, ten-claw, twelve claw etc. You may choose saw blade cutting type or planetary cutting type. It is additionally attached with length counter and intensifying device. This line with reliable performance and high production efficiency. Our company can also manufacture special pipe production lines, such as, spiral silencing pipe and core foaming pipe according to your requirements.
The production line is developed with the advanced technology of west Europe by our company. The main machine is SJSZ55/110 or SJSZ65/132 conical twin screw extruder is equipped with double-tube single control stainless steel spraying calibration,it avoids waste condition when one tube is adjusted and the other one is affected. The auto single-control double drawing machine and cutting machine are combined with the front double calibration technology to make operation more flexible let you enjoy economic benefit which is brought by separate-control double tube extruding.
Four cavities PVC electrical tube, water supply pipe extrusion line can extruder four pipes at same time on one machine. This line save investment cost in factory building and production, which increase the capacity a lot and reduce production time. SJSZ65 conical twin-screw extruder can easily reach 5.5-6.5 ton/per day, the production speed take 16 mm as example can get more than 8-10 m/min. The whole line is composed of conical twin-screw extruder 65 mm, 4 cavity mould, 4 cavity cooling calibration tank, 4 station haul off, 4 station cutter and 4 station tipping table.
PVC pipe conical twin screw extruder machine:
Water supply/drain water/conduit pipe mold(single out/double out/four out mold):
PVC pipe vacuum calibration and cooling table:
PVC pipe hualing off and cutting machine:
| Pipe diameter | Extruder model | Max output | Max speed | Total power |
| 16 - 53 mm | 65/132 | 250 kg/h | 10 m/min | 85 kw |
| 50 - 110 mm | 55/110 | 180 kg/h | 10 m/min | 70 kw |
| 63 - 160 mm | 65/132 | 300 kg/h | 5 m/min | 90 kw |
| 110 - 250 mm | 80/156 | 400 kg/h | 3.5 m/min | 120 kw |
| 250 - 450 mm | 92/188 | 700 kg/h | 1.5 m/min | 200 kw |
| 315 - 630 mm | 92/188 | 700 kg/h | 0.9 m/min | 230 kw |
